Super Standard Clamp Saddle
- الصفحة الرئيسية
- منتجاتنا
- الري
- العشب والزراعة
- المرابط
- Super Standard Clamp Saddle
SPECIAL FEATURES
- Alwasail PP Clamp Saddle is specially designed for tapping connections from Service Main.
- Alwasail Clamp Saddles have quite different structures and are consist of two parts, (Base and Upper Part). Both pieces are made of Polypropylene.
- According to their sizes, clamp saddles may have two, four or six bolts
- Alwasail saddles are the quickest and easiest saddle on the market to install.
- No need for Glue, Primer, or precutting
- More flexible, and reliable than the conventional fittings
- Less installation time to reduce labor cost
- Provide an “O” ring to prevent leakage
- Easy installation and maintenance of the underground water lines
- Saddle installation requires minimal excavation work to reduce time and labor cost
- Suitable for all Polyethylene, PVC, steel pipes, etc., and also suitable for all DIN & ASTM pipes PP saddles are Rust-Free and Corrosion-Free over the other type of saddles.
DATASHEET
ALWASAIL CLAMP SADDLE CONSISTS OF:
a) Base
b) Upper part
c) ‘O’ Ring
d) Bolt & Nuts
Base & Upper part :
Saddle (Base and Upper Part) Both pieces are made of combination of Polypropylene Grade PP – 570 and PP – 440
‘O’ Ring
‘O’ Rings are made of a styrene-butadiene – rubber (SBR)
Bolt & Nuts
Bolt and nuts are made of stainless steel with yellow plated Hex Bolts, full thread Din 933 – Cl – 4.8
Stainless Steel Bolt & Nut (Optional) to be supplied on Request
Reinforced Ring
Reinforced ring made of stainless steel ( Pro & Super saddle Model only)
No of Bolts / Saddle :
Sizes (mm) | No. of Bolts |
25 – 50 | 2 |
63 – 110 | 4 |
125 – 135 | 6 |
Manufacturing Standard: According to DIN – ASTM & others
Colour: Black
Execution: Injection
Tapping Outlet: BSP Thread
PRESSURE RATING:
Alwasail pipe saddles will maintain a compression seal for normal working pressures 16 bar.
CERTIFICATION:
Alwasail pipe saddles have been approved by TUV CERT ISO 9002 Certification Body of RWTUV systems Gmph.
Code | Type | L (cm) |
B (cm) |
H (cm) |
Volume (m³) |
S | Small | 40 | 30 | 30 | 0.036 |
M | Medium | 60 | 40 | 25 | 0.06 |
L | Large | 60 | 50 | 40 | 0.12 |
SANITARY LAWS:
Materials have complied with recommendations and statutory regulations in the USA and most European Countries regarding materials intended to come in contact with foodstuff.
- Position “O” ring on the top half of the saddle.
- Position bottom half of saddle on the pipe.
- Position the top half of the saddle on the pipe and insert bolts from the bottom.
- Fasten nut and bolts by Alwasail key for the saddle (Part # WSK – T 513).
- Drill hole in pipe with a hole saw bit.